Pillar- or Wall-Mount Omni Antennas
Designed with the retail market in mind, the pillar-mount
antenna pictured in Figure B-7 comes
from Telex Communications. It was designed to be mounted to a building-structure
pillar or to an inner-building wall. It also works well when placed on an
outside corner of two walls. It has a fabric covering over it, allowing it to
blend into the surrounding environment extremely well. This antenna supports
diversity and is provided with dual-feed cables for the AP.
The specifications listed in Table B-5 for the pillar-mount antenna are similar to
most typical 5.2-dBi antennas.
Table B-5. Specifications for a 5.2-dBi Diversity
Pillar-Mount Antenna
|
Parameter |
Specification |
|
Frequency range |
2.42.83 GHz |
|
VSWR |
2:1 Nominal |
|
Gain |
5.2 dBi |
|
Polarization |
Vertical |
|
Azimuth (3-dB BW) |
Omnidirectional 360 degrees |
|
Elevation (3-dB BW) |
25 degrees |
|
Dimensions |
12" * 5" * 1" |
Sections
